=== SIGNAL PATH (fixes audible/measurable on HW) ===

[CRITICAL] stereo: fix 38kHz subcarrier 1-sample phase offset
  Encode() called Sample() before capturing Phase(), so the 38kHz
  subcarrier used phase_{n+1} while pilot used phase_n — a constant
  60° phase error at 228kHz, degrading stereo separation to ~50%.
  Now captures phase BEFORE tick; stores lastPhase for coherent
  RDS carrier derivation.

[HIGH] rds: phase-lock 57kHz carrier to pilot via StereoEncoder
  RDS encoder had its own free-running 57kHz oscillator instead of
  deriving from 3×pilot. Two independent float64 oscillators drift
  apart over hours. Added NextSampleWithCarrier(carrier float64),
  generator now passes stereoEncoder.RDSCarrier() (sin(3·pilotPhase))
  so all subcarriers share one phase reference. NextSample() remains
  as backward-compat fallback with internal carrier.

[MEDIUM] dsp/fmmod: fix phase wrapping for negative phase
  Wrap condition only triggered on phase > pi. Negative phase from
  negative-biased composite could grow unbounded, losing float64
  precision after extended runtime. Now wraps on |phase| > pi.

[MEDIUM] dsp/oscillator: phase wrapping handles both directions
  Same pattern as fmmod — only wrapped positive overflow. Now wraps
  on phase >= 1 OR phase < 0 for defensive robustness.

=== DAUERLAUF / SBC STABILITY ===

[HIGH] offline/generator: eliminate per-chunk allocation (912KB @ 2.28MHz)
  GenerateFrame() allocated a new []IQSample every call. At Pluto
  rate (2.28MHz, 50ms chunks) that's 114k*8=912KB * 20/sec = 18MB/s
  garbage, causing GC pauses and hardware underruns on Raspi.
  Now pre-allocates frameBuf, reuses across calls. Grow-only policy,
  never shrinks. Safe because driver.Write() is blocking.

[MEDIUM] output/file: batch-write entire frame in one syscall
  Was writing 8 bytes per sample = 114k syscalls per chunk on Pluto.
  Now serializes into a reusable byte buffer, single file.Write().
  Orders of magnitude faster on Raspi SD-card I/O.

[MEDIUM] app/engine: add error backoff in TX loop
  run() tight-looped at 100% CPU on persistent driver errors
  (hardware disconnect, USB reset). Now backs off by chunkDuration
  per error using select with ctx.Done() for clean cancellation.

[MEDIUM] app/engine: replace time.Sleep shutdown with sync.WaitGroup
  Stop() used time.Sleep(2*chunkDuration) hoping run() would exit.
  Race condition if hardware Write() stalls. Now uses wg.Wait() for
  deterministic goroutine join before Flush/Stop.

=== CORRECTNESS / HYGIENE ===

[LOW] rds/normalize: filter to ASCII, prevent mid-rune truncation
  normalizePS truncated at 8 bytes, not 8 characters. UTF-8 input
  (e.g. umlauts) could split mid-rune producing corrupt RDS bitstream.
  Now replaces non-ASCII with space before truncation.

[LOW] offline/generator: increment frame sequence counter
  Sequence was hardcoded to 1 on every frame, useless for debugging.
  Now increments per GenerateFrame() call.

[LOW] control: document that config PATCH doesn't reach running engine
  Added TODO noting that POST /config updates server's copy only;
  running Engine/Generator holds its own snapshot.

[COSMETIC] dsp/preemphasis: remove dead fields y1, a1
  PreEmphasis.y1 and .a1 were never read in Process(). Removed from
  struct, constructor, and Reset(). Fixed misleading doc comment on
  PreEmphasizedSource (claims audio-rate, actually composite-rate).

Files changed:
  internal/stereo/encoder.go      - phase coherence fix
  internal/rds/encoder.go         - pilot-locked carrier API
  internal/rds/normalize.go       - ASCII safety
  internal/offline/generator.go   - buffer reuse + sequence + doc
  internal/dsp/fmmod.go           - bidirectional phase wrap
  internal/dsp/oscillator.go      - bidirectional phase wrap
  internal/dsp/preemphasis.go     - dead field removal
  internal/output/file.go         - batch write
  internal/app/engine.go          - WaitGroup + backoff
  internal/control/control.go     - TODO config propagation

Keep frame sequence numbers monotonic, lock the RDS carrier to the exact pilot phase used by the stereo encoder, and apply the accompanying DSP/control cleanups needed for stable live transmission behaviour.

Keep DSP state persistent across generated frames, move the RDS encoder to arbitrary sample-rate operation, and tune the Pluto profile to the working 2.28 MHz path with the levels that finally decode reliably.

Introduce CLI TX mode, hardware driver selection, IQ resampling to device rate, and platform-specific PlutoSDR/SoapySDR integrations. Update engine pacing for blocking hardware writes and refresh docs/release notes for the hardware-ready v0.6.0-pre milestone.